Our garage roof is at present covered in corrugated metal and is leaking in at least one place.
Refelting a garage roof.
Bond the drip the fold from the nails down and back up together and return the sheet to the roof deck bonding a 175mm length on top of the underlay.
Metal roof sheets metal garage roof sheets are popular due to their ability to withstand extreme weather conditions affordability and ability to withstand high temperatures.
Stone chippings are optional and for the most part they re decorative.
The one firm asked so far said it would need to be completely redone and boards replaced underneath.
This would involve stripping the lower layers of tiles from the roof and adding a 500mm strip of eaves protection felt before reinstating the tiles.
To redo it with similar material would be 2 500 and with coated corrugated metal would be 4 500.
To upgrade to a three layer flat roof system add 150 vat to the cost of a single garage and 250 vat to the cost of a double garage.
Dress the sheet down to below the timber batten overhanging the gutter and form a fold back up to the roof line and then fold the remainder back onto the roof.
I had to re felt my shed roof so i though i d share with you the process i went through and the materials i used.
Lay out the first piece and nail it onto the roof near the edge.
Measure the length and width of the roof and multiply them together to get the square metres which will determine how.
I am a reasonably competent diyer so will tackle new joists and boarding myself.
Ladder utility knife tape measure trowel 30 pound roofing felt also known as 30 roofing felt plywood planks galvanized nails roof felt adhesive e g.
Garage roof sheets are made from a variety of materials and each material comes with its own benefits so it is important to select the best one for your garage roof.
Hi guys and welcome to my video.
If the damage is more extensive and the roof is leaking it is normally a sign of other problems with the roof and the entire roof may need to be refurbished.