This section shows you how to repair flashing and apply caulk.
Replace house siding diy.
The diy method will most often save you money but it can take longer to complete.
If you are an experienced diyer and you have replaced old siding with new siding then you may be both competent and confident enough to take this on yourself.
A quality siding job is well sealed otherwise water can infiltrate and damage sheathing or the back of siding.
From removing old siding dealing with permits and purchasing the right materials know what you re getting yourself into before you begin to diy your siding project.
This is a cheap quick easy way to replace rotted siding on your house doing it yourself to avoid the expense of hiring someone to come and do it and without.
The heads will break the paper face allowing water to soak in and.
Slip a flat bar behind the vinyl siding and lever out the nails.
This will take much longer than a weekend.
Remove the nails in the corner cap.
Score down the damaged lap siding with a utility knife.
To replicate the.
Before the fiber cement shake panels image 1 go up you ll need to put up the fascia board.
Gap at corner and butt joints.
Diy or siding contractor.
Seal these joints.
Easy instructions on replacing your rotten siding.
Make your repair last prime the back and edges of the new siding.
Thoroughly paint all exposed edges and grooves.
Do not drive the nails flush or countersink them.
Hold any pieces above the.
Remove the nails on.
Over time however seals can weaken so it s important that you consistently check your siding s seal and replace or recaulk any damaged areas.